Tag Archives | Power Plants

Design of LaMont Boiler | Components | Steam Power Plant | Energy Management

In this article we will discuss about the design of LaMont boiler with the help of a suitable diagram. This boiler works on a forced circulation and the circulation is maintained by a centrifugal pump, driven by a steam turbine using steam from the boiler. For emergency an electrically driven pump is also fitted. Fig. 12.22 shows a LaMont steam [...]

By |2017-05-16T05:39:25+00:00May 16, 2017|Boilers|Comments Off on Design of LaMont Boiler | Components | Steam Power Plant | Energy Management

Design of Simple Gas Turbine Plant (With Diagram) | Energy Management

A simple gas turbine plant consists of the following: 1. Turbine. 2. A compressor mounted on the same shaft or coupled to the turbine. 3. The combustor. 4. Auxiliaries such as starting device, auxiliary lubrication pump, fuel system, oil system and the duct system etc. A modified plant may have in addition to above an intercooler, a regenerator, a re-heater [...]

By |2017-05-16T05:39:25+00:00May 16, 2017|Power Plants|Comments Off on Design of Simple Gas Turbine Plant (With Diagram) | Energy Management

Design of Benson Boiler | Components | Steam Power Plant | Energy Management

In this article we will discuss about the design of benson boiler which is used in steam power plants. Also learn about the advantages and benefits of benson boiler. In the LaMont boiler, the main difficult experienced is the formation and attachment of bubbles on the inner surfaces of the heating tubes. The attached bubbles to the tube surfaces reduce [...]

By |2017-05-16T05:39:25+00:00May 16, 2017|Boilers|Comments Off on Design of Benson Boiler | Components | Steam Power Plant | Energy Management
Go to Top